Dormax Fire and Escape Doors

We can offer a complete Fire Door, Frame, and Door Control solution for Classes A-F
Including Slide Door configuration.

* SABS/SANS Certification Tags provided with New Fire door and frame
* Fire Door door-only replacement Options (Conditions apply).
* Fire Door and Frame Installation.
* Fire-wall construction (brick and drywall)
* Doorway/Wall penetration for New Doors in existing Brick or Drywall.
* Door Control for manual operation, electronic access, security, and fire alarm integration.

The doors are fabricated and delivered as fully pre-hung units.
Standard measurements for Single Fire doors 813/900/1000mm Heights of  2032/2400mm. 
For Double Fire Doors, standard dimensions span Widths  1511/1600/1800mm and Heights of 2032/2400mm.
A 1.6mm frame serves as the minimum prerequisite for half-brick, full-brick, or drywall partitioning.
No hinged fire door panel exceeds the dimensions of 1200mm in width and 2700mm in height.  

If you are unsure of what is required, refer to the Fire-Plan, or Book a Free survey. If it is a risk to people, property, or business, Book a Call-Out.

Dormax Final Exit Doors and frames

For External and Internal Doors:
Stainless Steel cladding is expertly affixed for enhanced durability.

For Slide and Swing Door Applications
Ideal for RETAIL and COMMERCIAL spaces. Not to Replace Fire Doors.
Commonly Referred to as a Final Exit Door
Not a Suitable Replacement for Class A, B, C, D, E, or F Doors
Finishes: Vineer or Steel Clad External
Options: Additional Kick-plate, Push-Plate, Mop-Plate, Armour-Plate Or full clad on either/both sides for added durability.

Specifications
Frame: Mild Steel or Hardwood Frame
Hinges: Stainless Steel Heavy Duty x3 (per leaf)
Meeting Stiles: Galvanized Rebated for Double Doors
Sercer Tags: Not Issued
Clearance: Floor 5mm – 12mm
Viewing Pane: Options 100mm – 300mm wide and 100mm x 300mm high Double glazed Georgian Wired Glass.

If you are unsure of what is required, Book a Free survey. If it is a risk to people, property, or business, Book a Call-Out.

Fire Door Control

 1. Understanding Open-Stay and Closed-Stay Configuration
2. Panic Hardware Options
3. Door Closers and Coordinators

The options are plentiful, However.
We prefer Class A, B (iSO9001 European and SABS Approved brands), and Class C, SABS Approved locally sourced and rigourlessly tested products.

Always refer to the fire plan to ensure the correct hardware is ordered as it was Specified. Options to consider vary for single and double-door configurations. As it does for Doors in the “Open-Stay” vs “Closed-Stay” Position.*Minimum legal requirements are always an option, talk to us about alternative options and solutions.

Closed-Stay: Fire Doors kept in the “Closed” position with the application of a NON-Hold-Open Door Closer, are required to open outward with a single movement, without special knowledge, skill, or key. if Locking or latching is required. Panic Hardware must be expertly affixed. For Rebated double doors, the application of an SABS-approved mechanical door closer coordinator is required for an effective seal.

Open Stay: Fire Doors that are held in the “OPEN” position by an Electro-magnet or Electromechanical door coordinator are “released” on a signal from the fire alarm. These doors automatically close with the help of a Non-Hold-Open Door Closer. These doors are Not often fit with Panic Hardware. Double Doors with a rebate, require a coordinated close with the application of a Door Coordinator. Also available in Class A, B, or C. Each Class has an option for an Electromechanical coordinator that integrates with the Fire alarm, these offer an alternative to Hold-Open Magnets. Open Stay Configuration requires knowledge of the Fire alarm and property, Book a free survey to consider this configuration as a possible solution for you.

PANIC HARDWARE OPTIONS

Single Doors: 1, 2, and 3 point locking
Double Doors: 3 and 4-point locking. (Depending on the door rebate).
Outside Access Device: In Addition, options to grant and revoke access from the “outside” can be made possible by applying an Outside access device with a cylinder and key. This will allow the user to unlock the door during work hours, to be used for entry from both sides and locked in the evening while still allowing the internal Panic hardware to open the door in case of an emergency.
Non-Hold-Open Door Closer: Escape doors are fit with non-hold-open hydraulic door closers (surface mounted) or door springs for pivot doors. The closer /spring must be selected to withstand the forces and weight on the door. Browse our Panic Hardware Options  HERE

DOOR CLOSER AND COORDINATOR OPTIONS
Also available in Class A, B, or C.

Door Closer: Hydraulic Door Closers are available in Surface mounted and concealed options. Variable strength and speed settings. Selected based on door size and weight. Browse our door closer options HERE

Coordinator: Available for Open-Stay and Closed Stay double door configuration. Each Class has an option for an Electromechanical coordinator that integrates with the Fire alarm. Coordinators work with door closers to ensure a sealed close for rebated doors. Electromechanical Coordinators offer an alternative to Hold-Open Magnets. 

DOOR ARMOUR OPTIONS
Choices are available for 0.8mm to 1.3mm Stainless Steel. Prices vary based on Door Width and Height.

If you are unsure of what is required, Book a Free survey. If it is a risk to people, property, or business, Book a Call-Out. Give us a call at 0210230203